Upload your ECU log and let the AI find misfires, fueling problems, sensor issues, and hidden performance gains. No tuner booking needed. Start free.
This listing identifies a third-party MCP server. MCPBundles is not affiliated with, sponsored by, or endorsed by the service or its operator unless stated on this page.
This server may ask you to sign in when your AI client connects.
Last probed Nov 3, 2026 · tuneworks.ai
35tools discovered
For AI agents — MCPBundles Directory API
For MCP client apps (human connect):
MCP connect URL: https://tuneworks.ai/mcp
Skill page: https://www.mcpbundles.com/skills/tuneworks-mcp-fbeaa19cba
Explore capabilities (35)
read 20
write 5
Showing 25 of 35
Showing 25 of 35 tools from the public preview. Connect the server to inspect the full live tool list.
Calculate8
Create3
Get3
List3
Update2
Other capabilities6
Gear Ratio Speed Calculator
read
calculate_gear_ratio_speed
Use this free tool without authentication. Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world numbers.
Gear Ratio Speed Calculator — Use this free tool without authentication. Check speed, RPM, and shift drop from tire size, final drive, and gear ratio. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Use measured tire diameter when possible. Tire growth and converter/clutch slip can move real-world numbers.
Tire Pressure Adjustment Calculator — Use this free tool without authentication. Turn cold, hot, and target hot pressures into the next cold pressure to try. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. This gives a next-test pressure, not a universal ideal. Recheck after the next run.
Corner Balance Calculator — Use this free tool without authentication. Calculate cross weight, left/right balance, and front/rear split from four scale pads. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Measure the car in the same state you drive it: driver, fuel, ballast, and tire pressures matter.
Spring Rate Wheel Rate Calculator — Use this free tool without authentication. Convert spring rate and motion ratio into wheel rate for setup comparisons. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Wheel rate compares spring changes. It does not account for bars, bump stops, tires, or aero load.
Fuel Injector Duty Cycle Calculator — Use this free tool without authentication. Estimate injector size from horsepower, fuel type, injector count, and duty cycle. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. This is a sizing estimate. Confirm with your tuner and fuel pressure data.
AFR Lambda Converter — Use this free tool without authentication. Convert AFR and lambda across gasoline, E85, methanol, and race fuel scales. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Use this as a conversion reference. Tune targets depend on fuel, engine, load, and calibration strategy.
Get your MCP into directories
A working endpoint is step one. Directory coverage is the coordinated launch across ChatGPT, Claude, Cursor, the MCP Registry, and community indexes.
Upload your ECU log and let the AI find misfires, fueling problems, sensor issues, and hidden performance gains. No tuner booking needed. Start free.
How do I connect TuneWorks to my AI agent?
Use the MCP endpoint listed on this page in your MCP client configuration. One-click install pills support Claude, Cursor, VS Code, and other hosts. Copy the remote MCP URL if your client needs a manual entry.
How many tools does TuneWorks provide?
Operate this server?
Request removal if you do not want TuneWorks listed here, or claim the listing if you want to manage it on MCPBundles.
Operate TuneWorks?
This server appears in the MCPBundles directory. Verify you operate it to take over the listing — name, description, logo, contact email, and skill content. We email a 6-digit code to a maintainer address your server publishes in /.well-known/security.txt or /.well-known/mcpbundles.json. Free, takes about a minute.
MCPBundles publishes this directory for MCP discovery. Except where we host or operate an offering, third-party services run under their own terms. Product and company names on this page are used in a descriptive, identifying way (including under nominative fair use where applicable); they remain the property of their owners. Nothing here grants you rights in those marks, and nothing here is an offer to sell a third party's services. Terms · Request removal
More in automotive
Other MCP servers in this category from the directory index
Brake Bias Calculator — Use this free tool without authentication. Estimate front brake bias from piston area, rotor size, and pad friction. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. This estimates mechanical bias. Tire grip, weight transfer, ABS, and balance bars still matter.
Tire Size Comparison Calculator — Use this free tool without authentication. Compare tire diameter, circumference, ride height, and speedometer change. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Actual mounted diameter changes by tire model and pressure. Use manufacturer specs when available.
Race Alignment Checker — Use this free tool without authentication. Check camber and total toe against broad autocross and track baseline ranges. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. This is a baseline checker, not a vehicle-specific prescription. Tire wear and driver feedback decide the next step.
Lap Time Delta Calculator — Use this free tool without authentication. Compare two laps or sector sets and see the best theoretical lap. Uses the same calculation as the TuneWorks website; does not read or save account data. Supply measured inputs, not example defaults. Use sectors from timing, video, or data logs. Compare similar conditions before blaming setup.
E85 Ethanol Blend Calculator — Use this free tool without authentication to calculate an ethanol blend for a fresh tank, existing fuel, correction, or ratio. Uses the website calculation. Percentages are 0–100; all volumes use the selected unit. Supply tested source ethanol contents. Fresh needs finalVolume; existing needs finalVolume/currentVolume/currentEthanol; correct needs tankCapacity/currentVolume/currentEthanol; ratio needs no volumes. No account data is read or saved.
Diagnose handling issue — Use this without authentication for understeer/oversteer setup guidance. It does not access TuneWorks account data.
Analyze tire temperatures — Use this without authentication to interpret inside/middle/outside tire temperature readings. It does not access TuneWorks account data.
Recommend autocross damper adjustment — Use this without authentication for a bounded shock/damper adjustment recommendation. It does not access TuneWorks account data.
Get TuneWorks app capabilities — Use this when the user asks what TuneWorks can do with free public tools or with their connected garage, vehicles, setups, sessions, maintenance, shop lists, Share Build, and log history.
Create vehicle — Use this when the connected user explicitly asks to add a vehicle to their TuneWorks garage. Deletes are not supported.
Update vehicle — Use this when the connected user explicitly asks to edit an existing TuneWorks vehicle. Deletes are not supported.
Get garage summary — Use this when the user asks for an overview of their TuneWorks garage, recent activity, saved vehicles, setups, sessions, maintenance, or lists.
List vehicles — Use this when the user asks to see, choose, or reference vehicles saved in their TuneWorks app garage.
Get vehicle context — Use this when the user asks about one saved TuneWorks vehicle, including its setup, session, maintenance, list, or log context.
List setups — Use this when the user asks for chassis setups or setup history saved in their signed-in TuneWorks app account.
Create setup — Use this when the connected user explicitly asks to save a new TuneWorks setup for a vehicle. Deletes are not supported.
Update setup — Use this when the connected user explicitly asks to edit an existing TuneWorks setup revision. Deletes are not supported.
List sessions — Use this when the user asks for driving sessions, events, track days, autocross runs, or session notes saved in TuneWorks.
Create session — Use this when the connected user explicitly asks to save a new TuneWorks driving session. Deletes are not supported.
Showing the first 25 tools — full list and schemas: Directory API.
MCPBundles probed 35 tools on the live server. The tool list on this page reflects what was discovered at the last refresh — connect your client to see the full set available to your session.
What authentication does TuneWorks require?
TuneWorks may require signing in to the provider before tools can run. Connect through MCPBundles or your MCP client and complete any provider login when prompted.
Don't want this listed?
Request removal from the MCPBundles directory. We stop publishing this listing on mcpbundles.com.
MCPBundles is an independent platform built on the open Model Context Protocol standard. MCPBundles is not affiliated with, sponsored by, or endorsed by Anthropic PBC.